Local Dispensing Solutions Worldwide

Dispensing Valves

TS5400 Series Needle Valves


Needle Valves dispense very precise deposits over a wide range of shot and bead sized due to a minimal dead fluid one. An external stroke control adjustment to fine-tune shot sizes. Easy to maintain, with little or no downtime. The compact design and easy-mount threaded hole allows for easy integration into automated applications.

The TS5420 Adjustable Needle Valve is a pneumatically triggered single-acting valve that can be used with an internal spring close (single action) or may be connected for air closing without the spring (double acting).

The TS5440 Microshot Needle Valve, with its needle closing the fluid path directly on the canula inside the needle body, can dispense very precise deposits down to 0.0005 cm3.

The TS5440 Valve's wetted parts include FDA-compliant 303 Stainless Steel.

Recommended Controller: TS500RTS350TS250 
Click here to Watch the TS5420 Valve in Action


 
TS5420 Adjustable Series 
TS5420.jpg

TS5440 Microshot Series 
TS5440.jpg
  • Features
  • Specifications
  • Available Configurations
  • Precise and constant deposit sizes
  • TS5440 delivers as little as 0.5 micro litre per deposit
  • Zero “dead volume” when using TS5440
  • Bent dispensing tip placement made easy with rotating TS5420 tip collar
  • TS5440 wetted parts include FDA-compliant 303 stainless steel
  • Precise positioning of bent dispense tips due to design of material outlets
  • Low maintenance design


TS5420

TS5420SS

TS5440

Size Ø x H:

1.12” x 4.6” (28mm x 117mm)

1.12” x 4.6” (28mm x 117mm)

1.12” x 5” (28mm x 127mm)

Weight:

0.3lb (136g)

0.5 lb (227g)

0.5lb (227g)

Fluid Inlet:

1/8” NPT

1/8” NPT

1/8” NPT

Fluid Outlet:

Male Luer lock

Male Luer lock

Male Luer taper with locking cap

Mounting:

1/4-20UNC-2B

1/4-20UNC-2B

10-32UNF

Maximum Fluid Pressure:

300psi (20.7bar)

300psi (20.7bar)

100psi (6.9bar)

Minimum Operating Pressure:

70psi (4.8bar)

70psi (4.8bar)

70psi (4.8bar)

Wetted part:

303 SS,
Anodized Al,
Teflon®, EPR

303 SS,
Teflon®,
EPR

303 SS,
Teflon®,
EPR

Cycle Rate:

Exceeds 400cycles/minute

Exceeds 400cycles/minute

Exceeds 400cycles/minute

Material Viscously Range:

1 – 100,000cps

1 – 100,000cps

1 – 100,000cps

Warranty:

1 year

1 year

1 year


Available Configurations:

  Techcon is a brand of

  

   @2013 Techcon, All rights reserved 

   Privacy PolicyCode of Business ConductTerms & ConditionsSite Map    


 

Visit our other brand site