Techcon Systems

Local Dispensing Solution Worldwide
  • Deutsch (DE-CH-AT)
  • English (United Kingdom)
  • Español(Spanish Formal International)
  • 简体中文（中国）
Select Language:

Pressure Reservoir / Pressure Tank

Pressure Reservoir(s)

TS1258 PRESSURE TANK
Techcon Systems TS1258 pressure reservoir/tank is designed to accommodate fluids that are supplied in bottle/container form. Constant air pressure forces the fluid from the bottle through pre-installed tubing up to the point of dispense. Black fluid tubing is available for UV applications. Compression fittings are used on the lid of the pressure reservoir/tank to ensure a continuous fluid path to the dispensing valve. Air-tight seals ensure there are no leak points or air entrapment problems and that fluid touches nothing but tubing from pressure reservoir/ tank to the dispensing valve. Disposable polyethylene fluid lines can be changed quickly and easily.

 


Optional fluid line kits include top and bottom ferules, compression fitting, black and clear fluid lines (no clear fluid line supplied with TS1252-4MM).

Part Number Description
TS1258-250 ¼” (6.35mm) OD fluid line kit
TS1258-375 3/8” (9.5mm) OD fluid line kit
TS1252-4MM 4mm OD fluid line kit

TS1258 Pressure Tank Data Sheet

TS1254 Pressure Tank TS1254 Pressure Tank

TS1254 PRESSURE TANK

The new medium size TS1254 pressure tank is designed to accommodate low to medium viscosity fluids, including solvents, adhesives, as well as Cyanoacrylate (CA). Equip with pressure relief (safety) valve and couple with stainless steel chamber, the TS1254 provides safe and secure dispensing for all applications. Airtight lid seal ensures there are no leak points for air or material.

The material feed line is located in the center of the lid to allow direct and continuous feed path from the material container to the valve inlet. The TS1254 is supplied with ¼” (6mm) Teflon tubing to provide resistant to all types of dispensing fluids. An optional 4mm tubing kit (TS1252-4MM) is available.

 

 

 

TS1254 Pressure Tank Data Sheet

Optional TS918-46 4-way manifold - controls up to 4 valves from 1 pressure reservoir/tank.

The TS918-46 four-way manifold is designed to provide equal flow for up to four fluid lines for feeding multiple dispensing valves whenever precision fluid flow to multiple stations is required. Made from Delrin® and suitable with UV materials, the manifold can be used with any Techcon Systems pneumatic valve.