|
TS5400 Series Needle Valves
Needle Valves dispense very precise deposits over a wide range of shot and bead sized due to a minimal dead fluid one. An external stroke control adjustment to fine-tune shot sizes. Easy to maintain, with little or no downtime. The compact design and easy-mount threaded hole allows for easy integration into automated applications.
The TS5420 Adjustable Needle Valve is a pneumatically triggered single-acting valve that can be used with an internal spring close (single action) or may be connected for air closing without the spring (double acting).
The TS5440 Microshot Needle Valve, with its needle closing the fluid path directly on the canula inside the needle body, can dispense very precise deposits down to 0.0005 cm3.
The TS5440 Valve's wetted parts include FDA-compliant 303 Stainless Steel.
Recommended Controller: TS500R, TS350, TS250
Click here to Watch the TS5420 Valve in Action
Application Examples
Valve Application Guide
- Precise and constant deposit sizes
- TS5440 delivers as little as 0.5 micro litre per deposit
- Zero “dead volume” when using TS5440
- Bent dispensing tip placement made easy with rotating TS5420 tip collar
- TS5440 wetted parts include FDA-compliant 303 stainless steel
- Precise positioning of bent dispense tips due to design of material outlets
- Low maintenance design
|
TS5420 |
TS5420SS |
TS5440 |
| Size Ø x H: |
1.12” x 4.6” (28mm x 117mm) |
1.12” x 4.6” (28mm x 117mm) |
1.12” x 5” (28mm x 127mm) |
| Weight: |
0.3lb (136g) |
0.5 lb (227g) |
0.5lb (227g) |
| Fluid Inlet: |
1/8” NPT |
1/8” NPT |
1/8” NPT |
| Fluid Outlet: |
Male Luer lock |
Male Luer lock |
Male Luer taper with locking cap |
| Mounting: |
1/4-20UNC-2B |
1/4-20UNC-2B |
10-32UNF |
| Maximum Fluid Pressure: |
300psi (20.7bar) |
300psi (20.7bar) |
100psi (6.9bar) |
| Minimum Operating Pressure: |
70psi (4.8bar) |
70psi (4.8bar) |
70psi (4.8bar) |
| Wetted part: |
303 SS,
Anodized Al,
Teflon®, EPR |
303 SS,
Teflon®,
EPR |
303 SS,
Teflon®,
EPR |
| Cycle Rate: |
Exceeds 400cycles/minute |
Exceeds 400cycles/minute |
Exceeds 400cycles/minute |
| Material Viscously Range: |
1 – 100,000cps |
1 – 100,000cps |
1 – 100,000cps |
| Warranty: |
1 year |
1 year |
1 year |
Technical Details are accessible to Registered Users only. Registration is free. Click HERE to register and access all Techcon System technical documentation.
After your registration is complete, you will be returned to this page. Login with your registration credentials to access technical documents.
|
