The TS570R is a Smart auger valve controller capable of controlling all Techcon TS5000 series and TS7000 series auger valves. With a universal power supply, it is a fully ‘plug and play' system and can be used immediately, anywhere in the world.
The TS570R Smart auger valve controller features an intuitive touch screen interface for easy setup and operation. Dispensing parameters can be precisely configured directly on the touch screen or remotely through the networking options.
First in its class, the TS570R is equipped with Ethernet and WiFi interfaces that allow users to configure the exact parameters and monitor and control the process from anywhere in the world. This feature complies with Smart Factory requirements of Industry 4.0.
Additional advance features include digital timer to provide accurate and repeatable dispense time, and digital pressure regulator with dual-unit display to allow precise pressure control.
The friendly user interface provides an option to program up to 50 varied, sequenced or individual shots. These systems have a user programmable “purge,” “timed” dispense cycle settings and a "teach mode" for determining the dispensing time.
Integration into semi-automatic and automatic machinery is made easy with the I/O interface connector that can be used to initiate and stop the dispense cycle with feedback to the host machine for the next cycle. A low-pressure warning feature is also included to help maintain uninterrupted dispensing.
The controller is shipped with the following items:
Key Features and Benefits
Control TS5000DMP valve for:
IDENTIFICATION OF FEATURES
|Size (Imperial):||11.4' W x 8.3'' L x 3.9'' H|
|Size (Metric):||290mm x 211mm x 99mm|
|Weight:||6.8 lb (3100g)|
|Pressure Range:||0 to 100psi (0-6.9 bar)|
|Timing Range:||0.008 – 99.9 seconds|
|Timing Tolerance:||+/- 0.001%|
|Input Voltage:||100 – 240 VAC|
|Cycle Modes:||Timed, Interrupt, Teach, Purge|
Techcon offers a fluid dispensing system that will meet your specific needs. If you need help choosing a system or components or have any questions about our products, please feel free to contact us using the information below.
If you would like to place an order or have questions about your order, please contact our office.
Corporate Headquarters (United States)
OK International/ Techcon Headquarters
10800 Valley View Street
Cypress, CA 90630
European Corporate Office
OK International/ Techcon
Eagle Close, Chandler's Ford Industrial Estate, Eastleigh
Hampshire, SO53 4NF, United Kingdom
Tel: English +44 2380 489 100
Tel: Français: +33 176 710 403
Tel: Deutsch: +49 (0)3222 109 1900
China Corporate Office
OK International/ Techcon
4th floor East, The Electronic Building
Yanxiang Industrial Zone
High Tech Road, Guangming New District
Tel: +86-755-2327 6366
Fax: +86-755-2329 5492