Multi-Purpose Dispensing Valve Controller - TS500R

Multi-Purpose Dispensing Valve Controller - TS500R

Cost Effective and Productivity-focused Multi-Purpose Digital Controller.

The TS500R Multi-Purpose Digital Controller is the first of its type in the industry and is capable of controlling all Techcon valves including: Pneumatic Valves, Spray Valves, Rotary Auger Valves and Rotary Auger Valves with encoder motor. With a universal power supply, the TS500R is a fully ‘plug and play' system and can be used immediately, anywhere in the world, with its accompanying tools and accessories. 

The TS500R Multi-Purpose Digital Controller is equipped with digital timer and pressure read-out on a large LCD screen. Pressure can be set in both psi or bar. The user friendly firmware provides an option of programming up to 10 varied, sequenced or individual shots. These systems have a user programmable manual (purge) and automatic dispense cycle settings (program and time) and the they feature a "Teach Mode" for determining the dispensing time required when dispensing output is unknown. 

Integration into semi-automatic and automatic machinery is easy with the interface connector on the rear of this system. Through use of the interface port, the dispense cycle can be initiated, stopped and an end-of cycle signal can be fed back to the host machine in order to start the next dispense cycle. A low pressure warning feature is also included to help maintain uninterrupted dispensing.

Controls all Pneumatic, Spray, and Rotary Auger Valves (inc. encoder motor Valves) 

  • Universal power supply with snap-on plug
  • Clear 20 X 4 segments LCD display
  • Classic “Rack Mount” Rectangular design
  • Digital timing from 0.008-60.000 seconds
  • Digitally displayed pressure in ''psi'' or ''bar''
  • +/- 0.001% Repeat timing tolerances
  • 10 Programmable Memories
  • Adjustable low pressure warning feature
  • Accessories included: Universal power adapter, Foot Switch, air hose with fittings and 5 micron air filter. High visibility, 20 x 4 LCD display panel with back lighting.
  • Digitally displayed pressure in ''psi'' or ''bar''   
Cycle Rate: 900 cycles/minute
Timing Range: 0.008 – 60.000 seconds
Timing Repeat Tolerances: +/- 0.001%
Input Pressure: 100psi (6.9bar) maximum
Operating Pressure TS350: 1 – 100psi (0.07 – 6.9bar)
Dispense Mode: Timed, Purge, Teach and Interrupt
Meets or Exceeds: CE, TUV-GS and NRTL

Techcon offers a fluid dispensing system that will meet your specific needs. If you need help choosing a system or components or have any questions about our products, please feel free to contact us using the information below.

If you would like to place an order or have questions about your order, please contact our office.

Corporate Headquarters (United States)

OK International/ Techcon Headquarters

10800 Valley View Street
Cypress, CA 90630 
Tel: 1-714-230-2398
Fax: 1-714-230-2393

European Corporate Office

OK International/ Techcon

Eagle Close, Chandler's Ford Industrial Estate, Eastleigh
Hampshire, SO53 4NF, United Kingdom
Tel: English +44 2380 489 100
Tel: Français: +33 176 710 403
Tel: Deutsch: +49 (0)3222 109 1900

China Corporate Office

OK International/ Techcon

4th floor East, The Electronic Building
Yanxiang Industrial Zone
High Tech Road, Guangming New District
Shenzhen, P.R.C
Tel: +86-755-2327 6366
Fax: +86-755-2329 5492