The new smart jet valve delivers ultra-fast and high precision dispensing results for a wide range of adhesives and viscosities. The highspeed piezo actuator enables the valve to dispense as fast as 1500 Hz. continuously with up to 2000 Hz maximum burst and produce micro shot as small as 0.5 nL.
Every component of the valve was designed to the highest tolerances and manufactured to the strictest degree of precision insuring world class accuracy and repeatability in drop-to-drop dispensing volume.
- Fast dispense frequency, up to 1500 Hz continuous, with up to 2000 Hz maximum burst for higher throughput
- Micro shot size as small as 0.5 nL for small component applications
- Capable of jetting low to high viscosity fluid
- Localized fluid housing heater for better viscosity stabilization and dispensing (optional)
- Touch screen user-friendly interface for easy setup
- Parameters can be adjusted remotely
Size (inches): |
.63 x 2.7 x 4.9 |
Size (mm): |
16 x 69.3 x 124.8 |
Weight: |
258 g |
Weight: |
348g (0.77lb) |
Minimum Shot Size: |
0.5 nL |
Max Fluid Pressure: |
6.9 bar |
Nozzle Orifice Diameter Range: |
0.05 mm to 0.40 mm |
Max Dispensing Frequency: |
Up to 1500Hz Continuous, 2000Hz Bursts |
Parameter Sets Memory: |
50 sets internally, unlimited externally |
Standard Interface: |
DB15, RS-232 Ethernet, USB |
Operating Temperature: |
10ºC to 50ºC |
Power Connection: |
110/240 VAC; 50/60 Hz |
Wetted Part: |
304SS, Carbide, EPDM, TEFLON® |
Certification: |
TUV, KC PSE, NRTL, CE |
Part Number |
Description |
TS9800-TT15-H |
Jet Valve, TT1.5, with Heater, without Nozzle |
TS9800-TT7-H |
Jet Valve, TT0.7, with Heater, without Nozzle |
TS9800-TT15-NH |
Jet Valve, TT1.5, without Heater or Nozzle |
TS9800-TT7-NH |
Jet Valve, TT0.7, without Heater or Nozzle |
Typical applications include:
Electronics
- Edge sealing, end sealing of LCDs and OLEDs
- Die bonding, Frame bonding for camera module assembly
- Jetting silicone phosphor in the LED assembly process
- Jetting under-fill in micro-electronic package applications on PCBA
LED Assembly
- Jetting silicone phosphor
- Jetting under-fill for flip chip LEDs
- Jetting conformal coating
Medical Device & Life Science
- Jetting UV adhesives for bonding
- Jetting sealant for gasketing
- Jetting reagents to test strips
Medical Assembly
- Jetting UV sealant for gasketing
- Jetting greases for lubrication
- Jetting ink for marking
Techcon offers a fluid dispensing system that will meet your specific needs. If you need help choosing a system or components or have any questions about our products, please feel free to contact us using the information below.
If you would like to place an order or have questions about your order, please contact our office.
Corporate Headquarters (United States)
OK International/ Techcon Headquarters
10800 Valley View Street
Cypress, CA 90630
Tel: 1-714-230-2398
Fax: 1-714-230-2393
Email:
oemorders@okinternational.com
European Corporate Office
OK International/ Techcon
Eagle Close, Chandler's Ford Industrial Estate, Eastleigh
Hampshire, SO53 4NF, United Kingdom
Tel: English +44 2380 489 100
Tel: Français: +33 176 710 403
Tel: Deutsch: +49 (0)3222 109 1900
Email:
Europe-Orders@okinternational.com
China Corporate Office
OK International/ Techcon
4th floor East, The Electronic Building
Yanxiang Industrial Zone
High Tech Road, Guangming New District
Shenzhen, P.R.C
Tel: +86-755-2327 6366
Fax: +86-755-2329 5492
Email:
china@okinternational.com
| © 2017 Techcon. All rights reserved | Techcon is a brand of | Visit our other brand sites | ||
 |
 |