Disposable Pinch Tube Valves - TS1212

Disposable Pinch Tube Valves - TS1212

Buy Now

 
.
TS1212
 
Disposable Pinch Tube Valves provide control for continuous or micro shot applications of low to semi-viscous fluids. The TS1212 semi-automatic version relies on a dispensing controller sending a pre-programmed air signal that opens the valve and allows fluid to flow. Once the dispense cycle is complete, the air signal stops and the internal spring forces the shut-off piston to "pinch" the disposable feed path, preventing further fluid flow.

The only part of the valve making contact with the fluid being dispensed is the disposable pinch tube assembly making the TS1212 ideally suited to dispensing 2-part and CA (Cyanoacrylate) materials.

Recommended Controller: TS500R, TS350, TS250 in conjunction with TS1258
  • Disposable feed path – no cleaning required
  • Optional black feed paths for UV fluid applications
  • Optional polyurethane feed paths available
  • Simple to operate
  • Compact size and weight

TS1212
Size W x H: 3.3” NOM x 2.44” (83mmx62mm)
Weight: 0.18lb (82g)
Fluid Inle: Female Luer lock
Fluid Outle: Male Luer lock
Mounting: 1/4-20UNC-2B
Maximum Fluid Pressure: 60psi (4.1bar)
Wetted parts: Polyethylene, optional polyurethane
Cycle Rate: Exceeds 400 cycles/minute
Material Viscosity Range: 1 – 45,000cps
Warranty: 1 year

Pinch Tube Valve-TS1212 Data Sheet (PinchTubeValve_TS1212_DataSheet_EN_102417.pdf, 601 Kb) [Download]

Techcon offers a fluid dispensing system that will meet your specific needs. If you need help choosing a system or components or have any questions about our products, please feel free to contact us using the information below.


If you would like to place an order or have questions about your order, please contact our office.


Corporate Headquarters (United States)

OK International/ Techcon Headquarters

10800 Valley View Street
Cypress, CA 90630 
Tel: 1-714-230-2398
Fax: 1-714-230-2393
Email: oemorders@okinternational.com

European Corporate Office

OK International/ Techcon

Eagle Close, Chandler's Ford Industrial Estate, Eastleigh
Hampshire, SO53 4NF, United Kingdom
Tel: English +44 2380 489 100
Tel: Français: +33 176 710 403
Tel: Deutsch: +49 (0)3222 109 1900
Fax: +44 2380 489 109
Fax: +33 17 07 12 150
Fax: +49 (0)3222 109 1901
Email: Europe-Orders@okinternational.com