Positive Displacement PC Pump

Positive Displacement PC Pump TS8100-100

Buy Now

TS8100-100 PC

Techcon Systems is pleased to announce the launch of their new Positive Displacement PC Pump – TS8100-100.

The new TS8100-100 PC Pump is a continuously volumetric pump volumetric dispense designed based on Progressive Cavity (PC) technology. The pump can accurately dispense a wide range of fluids, from low viscosity coatings to high viscosity greases.

Techcon’s PC Pump uses a special stator and rotor design to provide accurate and consistent dispensing output. The pump can dispense a wide range of fluids, from low viscosity coatings to high viscosity greases.

The turning rotor on the TS8100 moves the fluid in tightly sealed cavities through the stator’s fluid chambers to create a volumetric fluid flow that does not change the shape or size of the fluid. Due to the PC pump’s unique dispensing technology, accuracy and repeatability of ± 1 percent is achievable.

The TS8100 comes standard with a syringe bracket, mounting bracket kit, luer lock fitting, cleaning kit and dispensing tip selection pack.

  • Volumetric, positive displacement
  • Accurate and repeatable up to ± 1%
  • No dripping with any viscosity fluid
  • Compatible with abrasive materials
  • Does not damage or break fillers
  • Easy to clean

Part Number:


Size (Imperial):

8.1'' Length x 1.34''

Size (Metric):

205.7mm x 34mm


13.4 oz (380g)

Fluid Inlet Port:

⅛'' NPT female

Fluid Outlet Port:

Luer taper and cap


24 vdc

Dispensing Volume Per Rotation:

0.012ml average

Flow Rate:

0.15 – 1.04 ml/min

Min. Dispense Amount:


Precision ± Absolute:

± 1% * [ 1 ]


2 bar (30 psi) * [ 2 ]

Direct Mount:

3 – 55ml Syringe

Mounting Port:


Viscosity Range:

1 – 300,000cps

Wetted Parts:

Acetal, SS*, PFE*, UHMWPE*

* [ 1 ] Volumetric dispensing as absolute deviation per complete revolution and also depends on dispensing fluid.

* [ 2 ] For fluid with viscosity of 1000 Cps or lower. The pump can handle up to 5.5 bar (80 psi) for 300K Cps viscosity fluid.

The Positive Displacement PC Pump TS8100-100 can be used in wide range of applications. Some examples of processes and applications are:

  • Under filling PCBA components
  • Encapsulation and Potting applications
  • Applying lubrication on automotive parts
  • Dispensing pastes and flux

TS8100-100 Positive Displacement PC Pump Spare Part Guide (TS8100-100-Series-Spare-Part-Guide.pdf, 377 Kb) [Download]

TS8100 Positive Displacement PC Pump Series Data Sheet (TS8100-Data-Sheet.pdf, 851 Kb) [Download]

TS8100 Positive Displacement PC Pump Series User Guide (TS8100-PC-PUMP-USER-GUIDE.pdf, 468 Kb) [Download]

Techcon offers a fluid dispensing system that will meet your specific needs. If you need help choosing a system or components or have any questions about our products, please feel free to contact us using the information below.

If you would like to place an order or have questions about your order, please contact our office.

Corporate Headquarters (United States)

OK International/ Techcon Headquarters

10800 Valley View Street
Cypress, CA 90630 
Tel: 1-714-230-2398
Fax: 1-714-230-2393
Email: oemorders@okinternational.com

European Corporate Office

OK International/ Techcon

Eagle Close, Chandler's Ford Industrial Estate, Eastleigh
Hampshire, SO53 4NF, United Kingdom
Tel: English +44 2380 489 100
Tel: Français: +33 176 710 403
Tel: Deutsch: +49 (0)3222 109 1900
Email: Europe-Orders@okinternational.com

China Corporate Office

OK International/ Techcon

4th floor East, The Electronic Building
Yanxiang Industrial Zone
High Tech Road, Guangming New District
Shenzhen, P.R.C
Tel: +86-755-2327 6366
Fax: +86-755-2329 5492
Email: china@okinternational.com