Techcon's TS9300HM Hot Melt Jet Tech Valve Series are easy to clean valves that provide jetting temperatures up to 150°C while keeping the jet actuator below 55°C. The TS9300HM Valve Series features:
Designed For Quick And Easy Cleaning
Techcon's patent pending diaphragm design enables you to exchange syringes quickly and requires minimal cleaning. To eliminate having to clean residual PUR between the syringe and the jet, the TS9300HM has a thermal jacket surrounding the high-temperature feed tube so the syringe can easily be removed with the feed tube attached. The valve also includes a disposable feed tube so only the nozzle plate and diaphragm are in contact with the fluid for quick and easy cleaning.
TS930 Standalone Controller
Techcon's stand-alone TS930 Controller is available to help program the TS9300HM Hot Melt Jet Valve. The TS930 Controller has dual independent temperature controllers and dual independent power supplies for the jet and the heater along with precision air regulators and gauges to fine-tune the jetting parameters. Six independent recipes can be input easily and stored using the fully programmable front panel on the TS930. Recipes can be triggered via a digital I/O connection for easy robot integration.
TS9300HM Hot Melt Jet Valve applications include:
Part Numbers For The TS9300HM Series Hot Melt Jet Valve Series:
Contact Techcon Systems for nozzle size and type recommendation.
Size Width |
61.6mm (2.43") |
Size Depth |
113.3mm (4.46") |
Size Height: |
191.1mm (7.52") |
Weight: |
0.91kg (2 lb) |
Speed: |
Up to 200Hz Continuous Duty |
Syringe Capacity: |
30cc |
Viscosity Range: |
Up to 7K Mpa.s (cps) @ 100ºC |
Fluid Pressure: |
0.50 Mpa (75 PSI) Max. |
Standard Carbide Nozzle Sizes: |
64µm, 75µm, 100µm, 125µm, 150µm, 200µm, 300µm, 400µm, |
Nozzle Heater: |
Heating up to 150ºC Max |
Fluid Heater: |
Heating up to 150ºC Max. |
Jet Pressure: |
0.2 Mpa (30 PSI) Min. 0.5 Mpa (75 PSI) Max. |
Controller Interface: |
LCD Display w/ Interface, RS-232 |
Input / Output: |
TTL level triggers |
The TS9300HM Series Hot Melt Jet Tech Valve is available in the following configurations:
Contact Techcon Systems for nozzle size and type recommendation.
The TS9300HM Hot Melt Jet Tech Valve can be used in wide range of applications. Some examples include:
Techcon offers a fluid dispensing system that will meet your specific needs. If you need help choosing a system or components or have any questions about our products, please feel free to contact us using the information below.
If you would like to place an order or have questions about your order, please contact our office.
Corporate Headquarters (United States)
OK International/ Techcon Headquarters
10800 Valley View Street
Cypress, CA 90630
Tel: 1-714-230-2398
Fax: 1-714-230-2393
Email:
oemorders@okinternational.com
European Corporate Office
OK International/ Techcon
Eagle Close, Chandler's Ford Industrial Estate, Eastleigh
Hampshire, SO53 4NF, United Kingdom
Tel: English +44 2380 489 100
Tel: Français: +33 176 710 403
Tel: Deutsch: +49 (0)3222 109 1900
Email:
Europe-Orders@okinternational.com
China Corporate Office
OK International/ Techcon
4th floor East, The Electronic Building
Yanxiang Industrial Zone
High Tech Road, Guangming New District
Shenzhen, P.R.C
Tel: +86-755-2327 6366
Fax: +86-755-2329 5492
Email:
china@okinternational.com