Disposable Diaphragm Valve

Disposable Material Path Diaphragm Valve - TS5624DMP

Buy Now


The TS5624 Disposable Diaphragm Valve features a “first to market” Disposable Material Path. Difficult fluids such as CA’s and pre-mixed 2-part epoxies, can now be dispensed without the need of frequent cleaning, by simply replacing the entire wetted area in a matter of seconds, while the valve stays on the production line.

The wetted parts are manufactured from black Polyethylene to prevent moisture and UV light come into contact with the dispense fluids. As a result, moisture sensitive fluids such as Cyanoacrylate and UV cured adhesives can be dispensed reliably and accurately.

The TS5624 dispenses low to medium viscosity fluids over a wide range of shot and bead sizes, down to a fraction of a micro liter. An internal spring return makes the valves fully adaptable for use with Techcon Systems controllers. A short opening stroke provides an extremely fast and positive shut-off.

The seal-less valve design offers an excellent moisture sensitive resistance and the incorporated diaphragm creates a barrier between the wetted parts and the air cylinder.

The valve comes with the following items:

  • Mounting bracket kit
  • Valve air hose
  • Luer lock fluid line
  • Sample packet of DMP inserts
  • Dispensing tip selection pack


  • Replacement DMP Insert: DMP-5624
  • Syringe Bracket: 7509-9100 fits all syringe sizes.
  • Fitting kit: VFKIT – for 1/4” OD tubing connection
  • Fluid Reservoirs: TS1254 or TS1258 pressure tank
  • Note: The TS1254 and TS1258 come with standard 1/4” OD tubing so the VFKIT will be required to make the connection.
  • Dispensing Tips: For the complete dispensing tip offering please contact us
  • Disposable material path – no cleaning
  • Compact size and weight
  • Excellent moisture sensitive resistance
  • No special tools required
  • Low cost of ownership
  • Accurate and repeatable dispensing
Part Number: TS5624DMP
Size (Imperial): See drawing
Size (Metric): See drawing
Weight: 0.25 lb (113g)
Fluid Inlet Port: Luer lock female
Fluid Outlet Port: Luer lock male
Aux Air Inlet Port: 10-32 UNF female
Activation Pressure Range: 70 psi - 90 psi (4.8bar - 6.2bar)
Max Fluid Pressure: 60 psi (4.1bar)
Operating Frequency: 400+ cycles/min.
Mounting Port: 10-32 UNF female
Viscosity Range: 1 - 50 000cps
Wetted Parts: Black Polyethylene Compound

Typical Applications:

  • Dispensing pre-mixed 2-part epoxy.
  • Dispensing Cyanoacrylate in bonding applications.
  • Applying a of UV lacquer in CD/DVD spin coating applications.

Disposable Diaphragm Valve TS5624DMP Data Sheet(English) (DisposableDiaphragmValve_TS5624DMP_DataSheet_EN_102417.pdf, 665 Kb) [Download]

Techcon offers a fluid dispensing system that will meet your specific needs. If you need help choosing a system or components or have any questions about our products, please feel free to contact us using the information below.

If you would like to place an order or have questions about your order, please contact our office.

Corporate Headquarters (United States)

OK International/ Techcon Headquarters

10800 Valley View Street
Cypress, CA 90630 
Tel: 1-714-230-2398
Fax: 1-714-230-2393
Email: oemorders@okinternational.com

European Corporate Office

OK International/ Techcon

Eagle Close, Chandler's Ford Industrial Estate, Eastleigh
Hampshire, SO53 4NF, United Kingdom
Tel: English +44 2380 489 100
Tel: Français: +33 176 710 403
Tel: Deutsch: +49 (0)3222 109 1900
Email: Europe-Orders@okinternational.com

China Corporate Office

OK International/ Techcon

4th floor East, The Electronic Building
Yanxiang Industrial Zone
High Tech Road, Guangming New District
Shenzhen, P.R.C
Tel: +86-755-2327 6366
Fax: +86-755-2329 5492
Email: china@okinternational.com