Teflon Tips

PTFE Lined Needle, 25 AWG x 1"

 
.
TF725100-1000
 

PTFE Lined Needle, 25 AWG x 1". The TF Series Teflon® lined tips are ideal for use with low viscosity materials and CA's (Cyanoacrylates). Benefits of using this tip include resisting Cyanoacrylate clogging and preventing damage to substrates. These silicone and chloride-free tips feature a double Helix polypropylene hub and a rigid Teflon® crimped lining that projects approximately 1/8'' from the inside of a stainless steel cannula. Maximum operating pressure 100psi is (6.9bar).

Techcon Systems offers a fluid dispensing system that will meet your specific needs. If you need help choosing a system or components or have any questions about our products, please feel free to contact us using the information below. You can also reach us by completing the short form on this page.

If you have any questions about our Techcon products, please let us know:

Contact-me


If you would like to place an order or have questions about your order, please contact our office.


Corporate Headquarters (United States)

OK International/ Techcon Systems Headquarters

10800 Valley View Street
Cypress, CA 90630 
Tel: 1-714-230-2398
Fax: 1-714-230-2393
Email: oemorders@okinternational.com

European Corporate Office

OK International/ Techcon Systems

Eagle Close, Chandler's Ford Industrial Estate, Eastleigh
Hampshire, SO53 4NF, United Kingdom
Tel: English +44 2380 489 100
Tel: Français: +33 176 710 403
Tel: Deutsch: +49 (0)3222 109 1900
Fax: +44 2380 489 109
Fax: +33 17 07 12 150
Fax: +49 (0)3222 109 1901
Email: Europe-Orders@okinternational.com