The Techkit is a compact and simple method of packaging two or three component resin systems into a 2.5oz (74ml), 6oz (177ml), 8oz (237ml), 20oz (591ml) or 1/10 gallon (325ml) cartridge. The kit mechanically separates the base and hardener until they are ready to be used. An internal mixing head provides a thorough blend for all types of compounds. Use with Techcon Systems cartridge dispensing guns. When the job has been completed, the entire package is disposed of: no clean up or physical contact with the resin.
Cost savings are achieved by reducing labor and material waste. Reliability is increased with accurate compound ratios, complete mixing and proper application techniques.
Three types of kits are available: Barrier, Injection and Barrier/Injection types.
For compounds with a volumetric ratio greater than 10 parts per 100. The catalyst and base are separated by an aluminum barrier formed over the mixing head.
For compounds with a volumetric ratio of 10 parts or less per 100. The catalyst is contained inside the valved mixing rod while the base is in the cartridge.
For three component compounds, components of both Injection and Barrier are combined.
Product Comprises of:
Cartridge, impellor, mixer rod, plunger, end cap
2.5 oz. = 74ml
6.0 oz. = 177ml
8.0 oz. = 237 ml
20.0 oz. = 591 ml
1/10 gallon = 325 ml
Techcon offers a fluid dispensing system that will meet your specific needs. If you need help choosing a system or components or have any questions about our products, please feel free to contact us using the information below.
If you would like to place an order or have questions about your order, please contact our office.
Corporate Headquarters (United States)
OK International/ Techcon Headquarters
10800 Valley View Street
Cypress, CA 90630
European Corporate Office
OK International/ TechconEagle Close, Chandler's Ford Industrial Estate, Eastleigh