Techkit Injection

Techkit, Injection, 2.5 oz., Plunger, Flange Cap, 600-200 Head, 610-100A Rod and Ram Rod

 
.
250-80
 

Techkit, Injection, 2.5 oz., Plunger, Flange Cap, 600-200 Head, 610-100A Rod and Ram Rod. Techkit, Barrier, 1/10th Gal., Plunger, Flange Cap, 110-340 Head, 810-100 Rod. The Techkit is a compact and simple method of packaging two or three component resin systems into a 2.5oz (74ml), 6oz (177ml), 8oz (237ml), 20oz (591ml) or 1/10 gallon (325ml) cartridge. The kit mechanically separates the base and hardener until they are ready to be used. An internal mixing head provides a thorough blend for all types of compounds. Use with Techcon Systems cartridge dispensing guns. When the job has been completed, the entire package is disposed of: no clean up or physical contact with the resin. 

Cost savings are achieved by reducing labor and material waste. Reliability is increased with accurate compound ratios, complete mixing and proper application techniques.


Three types of kits are available: Barrier, Injection and Barrier/Injection types.
Barrier Type
For compounds with a volumetric ratio greater than 10 parts per 100. The catalyst and base are separated by an aluminum barrier formed over the mixing head.
Injection Type
For compounds with a volumetric ratio of 10 parts or less per 100. The catalyst is contained inside the valved mixing rod while the base is in the cartridge.
Barrier/Injection Type
For three component compounds, components of both Injection and Barrier are combined.

Product Comprises of:

Cartridge, impellor, mixer rod, plunger, end cap

Techcon offers a fluid dispensing system that will meet your specific needs. If you need help choosing a system or components or have any questions about our products, please feel free to contact us using the information below.


If you would like to place an order or have questions about your order, please contact our office.


Corporate Headquarters (United States)

OK International/ Techcon Headquarters

10800 Valley View Street
Cypress, CA 90630 
Tel: 1-714-230-2398
Fax: 1-714-230-2393
Email: oemorders@okinternational.com

European Corporate Office

OK International/ Techcon

Eagle Close, Chandler's Ford Industrial Estate, Eastleigh
Hampshire, SO53 4NF, United Kingdom
Tel: English +44 2380 489 100
Tel: Français: +33 176 710 403
Tel: Deutsch: +49 (0)3222 109 1900
Fax: +44 2380 489 109
Fax: +33 17 07 12 150
Fax: +49 (0)3222 109 1901
Email: Europe-Orders@okinternational.com