Cartridge Mixer

Cartridge Mixer for 20 oz. (591ml) kit

 
.
TS6500CIM-20
 

Cartridge Mixer for 20 oz. (591ml) kit.  The TS6500 Series cartridge mixer provides complete automatic mixing of two-component material filled in a cartridge kit. The features rich TS6500 Series accommodates all standard size cartridge kits ranging from 2.5 oz (74ml) to 20 oz. (591ml) and is immediately usable anywhere in the world with its accompanying tools, accessories and universal power supply.

Equipped with an automatic fluid level sensing device and user friendly electronic control system, the TS6500 Series mixer allows for a quick and simple setup process. The automatic injection feature provides even distribution of the hardener into the resin during the mixing cycle to ensure uniform mixed result. The high torque motor maintains speed to allow for the continuous mixing of high viscosity material. Safety features include two-hand start, emergency stop button and the required closing of the protective enclosure to ensure maximum protection for operators. 
  • For 20 oz. kits
  • Universal power supply for worldwide use
  • Automatic fluid level sensing device for all kit sizes– No need to set stroke length
  • Automatically injects hardener into resin to provide uniform mixed material
  • Robust, high torque motor to handle high viscosity material
  • Safety features include safety enclosure, emergency stop button and two-hand start
  • Manual and automatic mixing cycle settings with 10 programmable memories
  • Quick and easy to replace cartridge holder and plunger
  • User friendly firmware for easy setup
  • Robust and sturdy platform for heavy industrial used
  • RoHS, WEEE compliance

Product Comprises of:

  • Techkit Mixer
  • Plunger assembly
  • Mounting brackets
  • Power cord
  • Air hose/fitting kit
  • Drip try
  • Extension block for 6'' mixer rods 

Dimensions:

15.7”W x 21.2”D x 40.6”H 398mm x 538mm x 1032mm

Weight:

80 lb (36kg)

Input Voltage:

100-230VAC, 50-60 Hz, 2 Amp

Motor Speed:

139 RPM

Air Inlet:

80 psi (5.5 Bar)            
Min. Stroke Speed: 33 Strokes/minute (fully extend)
Meets or exceeds: CE, cTUV-us
Warranty: 1 year

Techcon Systems offers a fluid dispensing system that will meet your specific needs. If you need help choosing a system or components or have any questions about our products, please feel free to contact us using the information below. You can also reach us by completing the short form on this page.

If you have any questions about our Techcon products, please let us know:

Contact-me


If you would like to place an order or have questions about your order, please contact our office.


Corporate Headquarters (United States)

OK International/ Techcon Systems Headquarters

10800 Valley View Street
Cypress, CA 90630 
Tel: 1-714-230-2398
Fax: 1-714-230-2393
Email: oemorders@okinternational.com

European Corporate Office

OK International/ Techcon Systems

Eagle Close, Chandler's Ford Industrial Estate, Eastleigh
Hampshire, SO53 4NF, United Kingdom
Tel: English +44 2380 489 100
Tel: Français: +33 176 710 403
Tel: Deutsch: +49 (0)3222 109 1900
Fax: +44 2380 489 109
Fax: +33 17 07 12 150
Fax: +49 (0)3222 109 1901
Email: Europe-Orders@okinternational.com