The TSM50FR and TSM120FR are fixed ratio metering, mixing and dispensing machines are pneumatically powered and digitally controlled utilizing PLC, HMI touch screen technology enabling a wide range of electrical accessories and easy robot interface.

These meter mix systems employ a parallel drive system with positive displacement pump technology to ensures repeatable, accurate volumetric metering, mixing and dispensing of low to medium viscosity two-part resin systems.

These compact machines are simplistic in its format and flexible in its design to accommodate a range of optional extras to suit the wide range of available resins and differing customer application needs.

The TSM50FR is capable of dispensing (depending on ratio) mixed material from 2 to 50cc. The TSM120FR will dispense from 5 to 120cc to within +/- 1% volumetric accuracy. The TSM50FR is a low cost investment and an economical solution to what is often inefficient and hazardous process.

These mix and dispense systems can be used in bonding, encapsulation, potting, sealing and insulating applications for all industries.

Typical Application:

  • Bonding
  • Encapsulation and Potting
  • Sealing
  • Insulating

Key Features:

  • Volumetric metering and mixing
  • Accurate and repeatable up to ± 1%
  • Fix ratio from 1:1 to 10:1
  • PLC, HMI touch screen
  • Adjustable shot size


Standard Features

Optional Features

  • 10 L SS tank with clamped, sealed lid and moisture trap
  • 5 L SS tank with clamped, sealed lid and moisture trap
  • 3 L SS tank with clamped, sealed lid and moisture trap
  • 7L polyethylene reservoir
  • Low level sensor with visual and audible alarm
  • Tank stirrer electric, control on HMI
  • Tank stirrer pneumatic
  • Tank heater with built in thermostat and power cable. Off/On via HMI

Metering Pumps

  • Part ‘A’ pump is EN40 anti-abrasive pump tube and glass filled nylon piston.
  • Part ‘B’ pump 303 stainless steel pump tube
  • Part B pump EN40 anti-abrasive pump tube and glass filled nylon piston
Mixing Head
  • 1/4BSP stainless steel 4/4 or 4/2 port machine mounted
  • Hand held, trigger operated
  • 5/3 or 5/3/5/ ported
  • Ratio check blocks
  • Seal cap


  • Standard length x 1/8 or ¼ or 3/8 or ½ inch bore PTFE lined stainless steel braided, m/s end fittings, from pump to machine mounted mixer
  • 1/8 or ¼ or 3/8 or ½ inch bore PTFE lined m/s SS end fittings 2 or 3 meters long
  • Heated and temperature controlled hose
Machine Control
  • PLC, HMI touch screen
  • Full Shot / Operator control
  • Stalled shot, pumps inch down the pump tube against closed mixer
  • LSA shot size control, limit switch on movable lead-screw Foot pedal actuation
  • Anti – gel timer on HMI Shot counter repeater on HMI
  • Kinecheck shot speed control
  • Re-circulation after NRV back to reservoir
  • Service kit for pump and mixing head
  • Hand held trigger actuated if hand held
  • I/O integration




Mix Ratio Options

1:1, 2:1, 4:1

1:1, 2:1, 4:1, 10:1

Shot Size Range

2 - 50 Cc

5 - 120 Cc

Maximum Viscosity

150,000 Cps. (Self-Level)

150,000 Cps. (Self-Level)


Foot Switch & Plc

Foot Switch & Plc

Metering Repeatability +/- 1% +/- 1%
Operating Pressure +/- 1% 100 psi


Disposable Static Mixers

Disposable Static Mixers

Tank Capacity Options

3, 5, 7, 10 Liter

3, 5, 7, 10 Liter


Parallel Drive, Positive Displacement

Parallel Drive, Positive Displacement

Control Panel Digital, Hmi Touch Screen Digital, Hmi Touch Screen

Power (Digital)

Single Phase 110V & 220V

Single Phase 110V & 220V

Dimension (W X D X H)

30.5" X 16.9" X 22.4" (775 X 430 X 570 Mm)

30.5" X 16.9" X 22.4" (775 X 430 X 570 Mm)


88 Lbs (40 Kg)

110 Lbs. (50Kg)

Techcon offers a fluid dispensing system that will meet your specific needs. If you need help choosing a system or components or have any questions about our products, please feel free to contact us using the information below.

If you would like to place an order or have questions about your order, please contact our office.

Corporate Headquarters (United States)

OK International/ Techcon Headquarters

10800 Valley View Street
Cypress, CA 90630 
Tel: 1-714-230-2398
Fax: 1-714-230-2393
Email: oemorders@okinternational.com

European Corporate Office

OK International/ Techcon

Eagle Close, Chandler's Ford Industrial Estate, Eastleigh
Hampshire, SO53 4NF, United Kingdom
Tel: English +44 2380 489 100
Tel: Français: +33 176 710 403
Tel: Deutsch: +49 (0)3222 109 1900
Fax: +44 2380 489 109
Fax: +33 17 07 12 150
Fax: +49 (0)3222 109 1901
Email: Europe-Orders@okinternational.com