TS350 Series Advanced Digital Dispenser/Controller
The TS350/355 Series Series dispenses low, medium and high-viscosity fluids accurately and consistently. The TS350/355 Series is immediately usable anywhere in the world with its accompanying tools, accessories and universal power supply.
The TS350 Series is equipped with a digital timer, pressure and vacuum read-out on a large LCD screen. The user friendly firmware provides an option of programming up to 10 varied, sequenced or individual shots. These systems have a user programmable manual (purge) and automatic dispense cycle settings (program and time) and the they feature a "Teach Mode" for determining the dispensing time required with dispensing output is unknown.
Available in two versions of operating pressure: 1 -100psi (0.07 - 6.9bar) for general applications, and 0 - 15psi (0.07 - 1.0bar) for specific low viscosity applications.
 TS350 Digital Dispenser/Controller Data Sheet
Application Examples
- Universal power supply with snap-on plug for worldwide use
- User programmable manual purge and automatic dispense cycle settings (program and time)
- 10 programmable memories for storing and recalling most frequently used dispensing cycle timing
- "Teach Mode" for determining the dispensing time required when dispensing output is unknown
- Digital timing from 0.008-60.000 seconds
- +/- 0.001% Timing repeat tolerances
- Digital pressure and vacuum read out
- Adjustable vacuum-driven "suck back" to control material "tailing" and waste
- Stable to conserve work space when multiple TS-350/355 units are used together.
- Tactile-responsive user programming buttons
- Large, clearly marked air pressure and vacuum control knobs
- Digitally displayed pressure in "psi" or "bar"
- High visibility, 20 x 4 LCD display panel with back lighting
- Accessories included: Universal power adapter, foot switch, syringe barrel stand, 10cc receiver head, air hose with fittings, cable holder and sample dispensing tips
| System Dimensions W x L x H: |
6" x 7" x 7.2" (152mm x 178mm x 183mm) |
| Cycle Rate: |
1200 cycles/minute |
| Timing Range: |
0.008 - 60.000 seconds |
| Timing Repeat Tolerance: |
+/- 0.001% |
| Input Pressure: |
100psi (6.9bar) maximum |
| Operating Pressure TS350: |
1 - 100psi (0.07 - 6.9bar) |
| Operating Pressure TS355: |
1 - 15psi (0.07 - 1.0bar) |
| Dispense Modes: |
Timed, Purge, Teach and Interrupt
|
| Meets or Exceeds: |
CE, TUV-GS and NRTL |
| Warranty: |
1 Year
|
Technical Details are accessible to Registered Users only. Registration is free. Click HERE to register and access all Techcon System technical documentation.
After your registration is complete, you will be returned to this page. Login with your registration credentials to access technical documents.
|
