|
Nozzles and Tip Adapters
Nozzles and dispensing tip adapters provide a wide range of application capabilities. Standard nozzles may be cut back to increase orifice size. Maximum operating pressure 100psi (6.9bar).
Dispensing Tip Adapters
These tip adapters have standard 1/4" NPT male threads on one end to fit all Techcon Systems cartridges or equivalent and standard male Luer lock threads on opposite side to fit all Luer lock dispensing tips.
|
2.5" (63.5mm) Length
|
|
Part Number
|
I.D (inches)
|
I.D (mm)
|
Material
|
|
TS216-1000
|
1/16
|
1.59
|
HDPE
|
|
TS218-1000
|
1/8
|
3.18
|
HDPE
|
|
TS218-LD-1000
|
1/8
|
3.18
|
LDPE
|
|
4" (102mm) Length
|
|
Part Number
|
I.D (inches)
|
I.D (mm)
|
Material
|
|
TS416-1000
|
1/16
|
1.59
|
HDPE
|
|
TS416-LD-1000
|
1/16
|
1.59
|
LDPE
|
|
TS418-1000
|
1/8
|
3.18
|
HDPE
|
|
TS432-1000
|
1/32
|
0.79
|
HDPE
|
|
TS432-LD-1000
|
1/32
|
0.79
|
LDPE
|
|
TS490-1000
|
3/32
|
2.38
|
HDPE
|
|
6" (152mm) Length
|
|
Part Number
|
I.D (inches)
|
I.D (mm)
|
Material
|
|
TS616-1000
|
1/16
|
1.59
|
HDPE
|
|
TS618-1000
|
1/8
|
3.18
|
HDPE
|
Ending number indicates bulk quantity, i.e. -1000 = 1000 pieces
LD = Low Density
MD = Medium Density
HD = High Density
PE = Polyethylene
Standard Nozzles
Standard nozzles are precision molded from natural polyethylene and have 1/4" NPT male threads to fit all Techcon Systems Cartridges or equivalent. Sold in bulk package of 1000. These nozzles can also be ordered with 30, 45, 80 and 90 degree bends, however minimum order, lead time and pricing considerations apply.
| Part Number |
Description |
| TS216-1000 |
2.5 x 1/16 (63.5mm x 1.59mm) Orifice, HDPE |
| TS218-1000 |
2.5" x 1/8" (63.5mm x 3.18mm) Orifice, HDPE |
| TS218-LD-1000 |
2.5" x 1/8" (63.5mm x 3.18mm) Orifice, LDPE |
| TS416-1000 |
4" x 1/16" (101.6mm x 1.59mm) Orifice, HDPE |
| TS416-LD-1000 |
4" x 1/16" (101.6mm x 1.59mm) Orifice, LDPE |
| TS418-1000 |
4" x 1/8" (101.6mm x 3.18mm) Orifice, HDPE |
| TS432-1000 |
4" x 1/32" (101.6mm x 0.79mm) Orifice, HDPE |
| TS432-LD-1000 |
4" x 1/32" (101.6mm x 0.79mm) Orifice, LDPE |
| TS490-1000 |
4" x 3/32" (101.6mm x 2.38mm) Orifice, HDPE |
| TS616-1000 |
6" x 1/16" (152.4mm x 1.59mm) Orifice, HDPE |
| TS618-1000 |
6" x 1/8" (152.4mm x 3.18mm) Orifice, HDPE |
Ending number indicates bulk quantity, i.e. -1000 = 1000 pieces
LD = Low Density
MD = Medium Density
HD = High Density
PE = Polyethylene
Specialty Nozzles
Spreader nozzles dispense material over a wider area whereas Fillet nozzles consistently apply sealant fillets over lap joints. A moulded step is incorporated into the Fillet nozzles to align them along the lap joint. The result is perfectly formed fillet.
| Part Number |
Description |
| TS1050-1000 |
4" (101.6mm) Spreader Nozzle
1/2"x 1/16" (12.7mm x 1.59mm) Opening |
| TS1050-45-1000 |
4" (101.6mm) Spreader Nozzle 45 Deg
1/2"x 1/16" (12.7mm x 1.59mm) Opening |
| TS1075-1000 |
4.5" (114.3mm) Spreader Nozzle
3/4"x1/8" (19.05mm x 3.18mm) Opening |
| TS1100-1000 |
4.4" (111.76mm) Spreader Nozzle
1" x 1/8" (25.4mm x 3.18mm) Opening |
| TS1175-1000 |
4" (101.6mm) Spreader Nozzle
1-3/4" x 1/8" Opening |
| TS3106-1000 |
4" (101.6mm) Fillet Nozzle 3/8" x 1/8"
(44.45mm x 3.18mm) Opening, Right Step |
| TS3206-1000-1000 |
4" (101.6mm) Fillet Nozzle 3/8" x 1/8"
(9.53mm x 3.18mm) Opening, Left Step |
Ending number indicates bulk quantity, i.e. -1000 = 1000 pieces
LD = Low Density
MD = Medium Density
HD = High Density
PE = Polyethylene
|
